52730-2J000 is a rear wheel hub bearing supplied by ALLTA Auto Parts for Kia Borrego / Mohave (HM) 2007-2010 in 3.8L Lambda V6 and 4.6L Tau V8 versions – confirm by VIN, axle side and ABS sensor configuration. 52730-2J000 is a rear axle wheel hub and bearing assembly for the Kia Borrego / Mohave (HM). Catalogues describe a Gen-3 roll-form design with a six-stud heavy-duty flange, a four-bolt mounting flange, about 139.2-139.3 mm outside diameter and a 69 mm inner diameter. The same interchange group lists 512415, BR930455, HA590153, WE61058, 2282HMR and 922576.
This page gives buyers the exact OE reference, axle position, cross references, dimensions and vehicle coverage in one place, so an importer, distributor or workshop can confirm fitment before requesting a quote. ALLTA is an aftermarket supplier; OEM numbers and vehicle names are used for identification only.
What is 52730-2J000?
52730-2J000 is a rear wheel hub bearing assembly with abs fitted to the rear axle; heavy-duty six-stud hub assembly. It carries the wheel load, keeps the wheel plane true and, where equipped, generates the wheel-speed signal for the ABS. The unit is sealed and pre-set at the factory, so it is replaced as a complete assembly rather than rebuilt.
Product Specifications
| Item | Specification |
|---|---|
| Part type | Gen-3 roll-form rear wheel hub and bearing assembly |
| Fitting position | Rear axle; confirm side and ABS configuration by VIN |
| ABS | ABS tone ring around 30 teeth; sensor is non-integral on this application |
| Wheel studs | 6-stud heavy-duty wheel flange |
| Mounting | 4-bolt mounting flange |
| Dimensions | Outside diameter about 139.2-139.3 mm; inner diameter about 69 mm |
| Cross references | 512415 / BR930455 / HA590153 / WE61058 / 2282HMR / 922576 |
| Supply | MOQ 6 pcs; neutral, ALLTA or private-label packing; Available upon request where applicable documents on request |
| OE Number | 52730-2J000 |
| Brand | ALLTA (aftermarket replacement) |
| MOQ | 6 pcs |
| Warranty | Confirmed by product and quotation |
| Certificate | Available upon request where applicable |
| Packing | Neutral carton, ALLTA carton or customised private label |
| Service | OE matching, cross reference checking, sample order, wholesale supply |
Vehicle Fitment for 52730-2J000
The table below lists the applications recorded for 52730-2J000. Treat it as a sourcing guide: trim level, market and production date can change the part, so always confirm against the number on the original unit or the VIN.
| Vehicle brand | Model / engine | Position | Year |
|---|---|---|---|
| Kia | Borrego / Mohave (HM) 3.8L Lambda V6 | Rear axle | 2009-2010 |
| Kia | Borrego / Mohave (HM) 4.6L Tau V8 | Rear axle | 2009-2010 |
| Kia | Borrego / Mohave (HM) LX / EX trims | Rear axle | 2007-2010 |
Cross Reference and OE Interchange
When the local catalogue shows a different number, compare the following references with the flange, bolt pattern, splined bore and ABS ring before substituting: 512415 / BR930455 / HA590153 / WE61058 / 2282HMR / 922576 / SKF BR930455 / Timken HA590153 / NTN WE61058 (verify by VIN, stud pattern and ABS sensor).
A cross reference is an interchangeable number, not a guarantee of identical sensors or packaging. Send the number from the old part and a photo of both faces and our team will confirm the match.
How to Confirm Fitment Before Ordering
- Read the OE number stamped or laser-marked on the original hub, not only the vehicle registration.
- Check the axle position (front or rear) and whether the left and right sides share one part number.
- Compare the flange diameter, wheel stud count and thread, centre bore and mounting bolt pattern.
- Confirm the ABS configuration: encoder ring, tone ring tooth count and sensor connector where applicable.
- Send the VIN, model year and a clear photo of both sides of the old unit with your enquiry.
Frequently Asked Questions
Q: Which vehicles does 52730-2J000 fit?
A: It is listed for the Kia Borrego / Mohave (HM) 2007-2010 in 3.8L V6 and 4.6L V8 versions. Chassis code and drivetrain can change the hub, so confirm by VIN and the number on the original part.
Q: Is this a front or rear hub?
A: Catalogues describe 52730-2J000 as a rear axle hub and bearing assembly. The front axle of the Borrego uses a different reference such as 51750-2J000.
Q: Does 52730-2J000 include the ABS sensor?
A: This hub uses an ABS tone ring of about 30 teeth and the wheel-speed sensor is normally non-integral on this application. Compare the sensor and connector with the old part before ordering.
Q: Why is the stud count important here?
A: The Borrego rear hub uses a six-stud heavy-duty flange with a four-bolt mounting flange and about 139 mm outside diameter. A visually similar five-stud hub from a smaller Kia will not fit.
Q: What is the MOQ and warranty?
A: ALLTA quotes from 6 pcs with a Warranty confirmed by product and quotation, neutral or private-label packing and Available upon request where applicable documentation on request.
Related ALLTA Wheel Hub Bearings
Continue sourcing within the ALLTA catalogue: Wheel Hub Bearings category, Kia wheel hub bearing supplier, Hyundai wheel hub bearing supplier, 52730-0Q100 Hyundai Creta rear hub bearing, 52730-C1100 Hyundai Tucson rear hub bearing, 52730-F0000 Hyundai / Kia rear hub bearing, 43402-58M00 rear wheel hub bearing, 42450-52080 rear wheel hub bearing, 43401-81P00 front wheel hub bearing, request a quotation for 52730-2J000. You can also browse the full product catalogue for other chassis references.
References and Standards
Vehicle and technology context: Kia official global site, 52730-2J000 Kia Borrego rear hub OE and dimensions, SAE international automotive standards. ALLTA production and inspection follow IATF 16949 aligned quality control with SGS documentation available on request. OEM part numbers and vehicle names on this page are used for fitment identification only; ALLTA is not affiliated with or endorsed by any vehicle manufacturer.
Need a price, lead time or sample? Send the OE number and quantity to the ALLTA team and we will confirm fitment, packing and delivery before the order is placed.
52730-2J000 Wholesale Sourcing: Matching, Quality and Delivery
Buyers comparing 52730-2J000 should start with the physical specification. The Kia Borrego / Mohave rear hub uses a six-stud heavy-duty flange and a four-bolt mounting flange, so a similar-looking hub from a smaller Kia or Hyundai will not fit. ALLTA matches the OE number and the old part first.

Cross references such as 512415, BR930455, HA590153 and WE61058 appear in the same catalogue group. Therefore compare the six-stud pattern, the 139 mm outside diameter, the tone ring and the non-integral ABS sensor before treating those numbers as interchangeable.
Tell the ALLTA team the VIN, the old-part number and the required quantity to confirm stock, label artwork and lead time. Useful pages: wheel hub bearings category, Kia hub bearing supplier, 52730-C1100 related Kia / Hyundai hub, and request a quote for 52730-2J000. Catalogue background: 52730-2J000 Kia Borrego rear hub OE and dimensions.



