40202-4JA1A Front Wheel Hub Bearing | Nissan Navara NP300

40202-4JA1A Front Wheel Hub Bearing | Nissan Navara NP300

✓ SGS documentation ✓ Quality management certified ✓ Certificates on request ✓ Worldwide shipping

Quick Details

OE Number: 40202-4JA1A
Cross Reference: 40202-4KJ1A / 40202-4KH1A / 402024JA1A / SKF VKBA7133 / FAG 713141810 / GSP 9329036 / GSP 9400398 / 4A18-A44 / RS3098
Application: Nissan Navara NP300 (D23, D23T, D23F) 2WD pickup and Nissan Terra 2018+ 2WD SUV, with 2.3 dCi YS23DDT, 2.5 dCi YD25DDTi and 2.5 QR25DE engines
Position: Front axle, 2WD models - verify side and chassis by VIN
Brand: ALLTA
MOQ: 6 pcs
Warranty: Confirmed by product and quotation
Certificate: Available upon request where applicable
Material: 55# Steel
Category: Wheel Hub Bearings

Reference Note: OEM/OE numbers, vehicle names and brand names are used for reference and fitment identification only. All trademarks belong to their respective owners. ALLTA is not affiliated with or endorsed by any vehicle manufacturer.

Get A Quote

    Your Name *

    Company

    Email *

    WhatsApp / WhatsApp & Phone

    OE Number / Part Number & Vehicle Model

    Quantity / Target Market / Requirement

    The 40202-4JA1A front hub assembly is ALLTA’s supply reference for the Nissan Navara NP300 (D23) pick-up and the Terra 2WD SUV. It is specified for two-wheel-drive front axles running the 2.3 dCi YS23DDT, 2.5 dCi YD25DDTi or 2.5 QR25DE engine.

    What makes this hub easy to recognise is the wiring. A short ABS sensor harness leaves the encoder housing, so it looks quite different from a plain flange hub. The wheel face carries six studs while the mounting flange uses four bolts — a combination worth checking before ordering.

    Technical data at a glance

    FieldValue
    Part typeFront wheel hub bearing assembly, sealed double-row unit
    Fitting positionFront axle, 2WD models (Navara D23F pickup, Terra 2WD) – confirm by VIN
    Mounting flangeFour-bolt mounting flange; six wheel studs on the wheel face (confirmed from product photographs)
    ABSIntegrated encoder ring with ABS sensor wire harness – connector shown in the product photographs
    Centre boreSplined for the driveshaft outer CV joint
    MaterialGCr15 / 52100 chrome bearing steel, double rubber seals
    Inner bearing reference54KWH-series family (catalogue cross reference)
    ServiceSealed, factory pre-set unit – replaced as a complete assembly
    Our ref.40202-4JA1A
    MakeALLTA replacement line
    Minimum6 pieces
    GuaranteeConfirmed by product and quotation
    DocsIATF 16949 + SGS available
    BoxPlain, branded or private label

    Navara D23 and Terra 2WD applications

    Use the chart as a sourcing guide. Whether a given market fitted this hub depends on the chassis code and whether the truck is 2WD; four-wheel-drive D23 variants use a different front assembly, so the drive configuration matters as much as the model name.

    MakeVariant / motorDriven axleFrom
    NissanNavara NP300 D23 / D23T 2.3 dCi YS23DDTFront wheel, 2WD2015-
    NissanNavara NP300 D23 2.5 QR25DE petrolFront wheel, 2WD2014-
    NissanNavara NP300 D23 2.5 dCi YD25DDTiFront wheel, 2WD2014-
    NissanNavara D23F pickup 2WDFront wheel2014-
    NissanTerra 2WD SUVFront wheel2018-
    NissanFrontier 2WD (market dependent)Front wheelconfirm by VIN

    The ABS harness: what to check before you buy

    Because the encoder signal is carried by a physical lead, the connector shape and the length of the harness are part of the fitment. Compare them with the old hub rather than assuming all references with a similar flange are interchangeable.

    • Confirm the vehicle is 2WD — the 4WD front hub is a different part.
    • Compare the ABS connector and harness routing with the original.
    • Count six wheel studs and four mounting bolts on the flange.
    • Check the splined centre bore engages the outer CV joint.

    Cross reference numbers

    These are the references most often quoted against this hub. Several are grouping numbers covering more than one flange pattern, so match the photographs as well as the code.

    40202-4JA1A: 40202-4KJ1A / 40202-4KH1A / 402024JA1A / SKF VKBA7133 / FAG 713141810 / GSP 9329036 / GSP 9400398 / 4A18-A44 / RS3098

    Buyer questions answered

    Which vehicles does 40202-4JA1A fit?

    It is catalogued for the Nissan Navara NP300 D23 / D23T 2WD pickup (2.3 dCi YS23DDT, 2.5 dCi YD25DDTi and 2.5 QR25DE) and the Nissan Terra 2WD from 2018. Market and chassis code can change the part, so confirm against the original unit and the VIN.

    Is 40202-4JA1A a front or rear bearing?

    It is a front axle wheel hub bearing assembly for 2WD models. Check the axle position and side on the original part before ordering a pair.

    Does it include the ABS sensor?

    The hub carries an encoder ring and an ABS sensor wire harness, as shown in the product photographs. Confirm the connector shape against the original unit; the sensor itself may be ordered separately depending on the market.

    What cross references are listed for 40202-4JA1A?

    Common catalogue references include 40202-4KJ1A, 40202-4KH1A, VKBA7133, FAG 713141810, GSP 9329036, GSP 9400398 and 4A18-A44. Compare the four-bolt flange, six wheel studs, splined bore and ABS harness before substituting.

    What is the MOQ and warranty?

    The minimum release is six pieces. Ask for a written quote and we will detail cartons, label options and the schedule for your quantity.

    Other pick-up and SUV hub references in the ALLTA range:

    See the full ALLTA catalogue More models are listed in the.

    Technical sources and compliance

    Manufacturer and standards context: Nissan official global site, Nissan Navara model background, ABS wheel-speed signal reference, SAE international automotive standards. Our inspection follows IATF 16949 and SGS documentation can be supplied. All OE codes quoted here serve purely to match the correct part.

    For a pick-up workshop or distributor price list, contact the ALLTA desk about 40202-4JA1A include your annual volume and we will reply with terms and lead time.

    The ALLTA wheel hub bearing 40202-4JA1A is designed for Nissan Navara NP300 (D23, D23T, D23F) 2WD pickup and Nissan Terra 2018+ 2WD SUV, with 2.3 dCi YS23DDT, 2.5 dCi YD25DDTi and 2.5 QR25DE engines models. It helps support smooth wheel rotation, stable driving performance, and reliable aftermarket operation.

    This product is suitable for auto parts importers, wholesalers, distributors, repair shops, and aftermarket suppliers. ALLTA supports OE number matching, cross reference number checking, sample orders, wholesale supply, and customized packaging according to customer needs.

    Before placing an order, buyers are advised to confirm the OE number, cross reference number, vehicle model, production year, and installation position. If you are not sure whether this part is correct, please send us the OE number or product photo for checking.

    Why Choose ALLTA?

    • Warranty confirmed by product and quotation
    • Pre-shipment inspection and order photo confirmation when applicable
    • Support OE number and cross reference number matching
    • Low MOQ for sample and trial orders
    • Stable supply for wholesalers and distributors
    • Customized packaging available according to customer needs
    Get a Quote
    Price & Availability

    Contact ALLTA for current pricing and availability. Final quotation depends on order quantity, packing requirement and target market. This product is available for OE matching, sample inquiry and bulk export quotation.

    WAWhatsApp