40202-ED510 is a front wheel hub bearing supplied by ALLTA Auto Parts for Nissan Tiida C11 / SC11 (2004-2013), Versa / Latio, Livina, Sylphy, Cube Z12 (2009-2014) and Dongfeng Qichen D50 / R50. 40202-ED510 is a Generation 3 sealed front wheel hub bearing assembly for the Nissan Tiida C11, Versa, Livina, Sylphy and Cube Z12, with a 136 mm flange, four M12 x 1.25 wheel studs, a splined centre bore and an integrated magnetic ABS encoder ring.
This page gives buyers the exact OE reference, axle position, cross references, dimensions and vehicle coverage in one place, so an importer, distributor or workshop can confirm fitment before requesting a quote. ALLTA is an aftermarket supplier; OEM numbers and vehicle names are used for identification only.
What is 40202-ED510?
40202-ED510 is a front wheel hub bearing assembly fitted to the front axle, left or right (same unit both sides). It carries the wheel load, keeps the wheel plane true and, where equipped, generates the wheel-speed signal for the ABS. The unit is sealed and pre-set at the factory, so it is replaced as a complete assembly rather than rebuilt.
Product Specifications
| Item | Specification |
|---|---|
| Part type | Generation 3 sealed wheel hub bearing unit, double-row angular contact |
| Fitting position | Front axle, left or right (identical unit both sides) |
| Flange diameter | 136 mm, three-ear knuckle flange |
| Wheel studs | 4 x M12 x 1.25 |
| Centre bore | Splined for the driveshaft outer CV joint (25-tooth catalogue reference) |
| ABS | Integrated magnetic encoder ring; the wheel-speed sensor itself is not included |
| Material | 55# / GCr15 bearing steel, sealed-for-life high-temperature grease |
| Bearing preload | Factory-set; the unit is replaced complete, never repacked |
| OE Number | 40202-ED510 |
| Brand | ALLTA (aftermarket replacement) |
| MOQ | 6 pcs |
| Warranty | Confirmed by product and quotation |
| Certificate | Available upon request where applicable |
| Packing | Neutral carton, ALLTA carton or customised private label |
| Service | OE matching, cross reference checking, sample order, wholesale supply |
Vehicle Fitment for 40202-ED510
The table below lists the applications recorded for 40202-ED510. Treat it as a sourcing guide: trim level, market and production date can change the part, so always confirm against the number on the original unit or the VIN.
| Vehicle brand | Model / engine | Position | Year |
|---|---|---|---|
| Nissan | Tiida C11 / SC11 1.5, 1.6, 1.5 dCi | Front wheel | 2004-2013 |
| Nissan | Versa / Latio | Front wheel | 2007-2012 |
| Nissan | Livina / Sylphy | Front wheel | 2006-2013 |
| Nissan | Cube Z12 | Front wheel | 2009-2014 |
| Dongfeng Qichen | D50 / R50 | Front wheel | 2011-2015 |
Cross Reference and OE Interchange
When the local catalogue shows a different number, compare the following references with the flange, bolt pattern, splined bore and ABS ring before substituting: 40202-ED000 / 40202-EL000 / 40202-EM00A / 40202-EE500 / 40202-EE90A / 40202-1FC0A / 40202-EM30A / 40202-ZW70A / SKF VKBA7535 / SNR R168.77 / Timken HA590285 / HA590379 / MOOG 513308 / 513344.
A cross reference is an interchangeable number, not a guarantee of identical sensors or packaging. Send the number from the old part and a photo of both faces and our team will confirm the match.
How to Confirm Fitment Before Ordering
- Read the OE number stamped or laser-marked on the original hub, not only the vehicle registration.
- Check the axle position (front or rear) and whether the left and right sides share one part number.
- Compare the flange diameter, wheel stud count and thread, centre bore and mounting bolt pattern.
- Confirm the ABS configuration: encoder ring, tone ring tooth count and sensor connector where applicable.
- Send the VIN, model year and a clear photo of both sides of the old unit with your enquiry.
Frequently Asked Questions
Q: Which vehicles does 40202-ED510 fit?
A: It is catalogued for the Nissan Tiida C11 / SC11, Versa / Latio, Livina, Sylphy, Cube Z12 and Qichen D50 / R50 on the front axle. Confirm the number stamped on the original hub, because Nissan revised this reference several times.
Q: Is 40202-ED510 a left or right side part?
A: It is the same unit on both sides of the front axle, so there is no left/right distinction for this reference.
Q: Does it include the ABS sensor?
A: The hub carries an integrated magnetic encoder (tone) ring. The wheel-speed sensor is a separate part and is not included in the box.
Q: What are the key dimensions?
A: 136 mm flange diameter, four M12 x 1.25 wheel studs, a three-ear knuckle flange and a splined centre bore for the driveshaft.
Q: What is the MOQ and warranty?
A: ALLTA quotes from 6 pcs for this hub unit, with a Warranty confirmed by product and quotation. Packing, labelling and lead time are confirmed on the quotation.
Related ALLTA Wheel Hub Bearings
Continue sourcing within the ALLTA catalogue: Wheel Hub Bearings category, Nissan wheel hub bearing supplier, Nissan OE number catalog, 6M51-2C299-AC rear wheel hub bearing, 6M51-2C300-AC front wheel hub bearing, 42200-SNA-A51 rear wheel hub bearing, 28373-VA000 front wheel hub bearing, request a quotation for 40202-ED510. You can also browse the full product catalogue for other chassis references.
References and Standards
Vehicle and technology context: Nissan official site, Nissan Tiida C11 model background, ABS wheel-speed signal reference. ALLTA production and inspection follow IATF 16949 aligned quality control with SGS documentation available on request. OEM part numbers and vehicle names on this page are used for fitment identification only; ALLTA is not affiliated with or endorsed by any vehicle manufacturer.
Need a price, lead time or sample? Send the OE number and quantity to the ALLTA team and we will confirm fitment, packing and delivery before the order is placed.



