43202-3DA0A is a rear wheel hub bearing supplied by ALLTA Auto Parts for Nissan Pulsar Hatchback (C13) 2013-on (1.2 DIG-T, 1.5 dCi and 1.6 DIG-T), Nissan Sylphy / Sentra (B17Z) 2012-on, Tiida (C12Z / C13Z) 2011-on, Bluebird (U15Z) 2015-2022 and Nissan Juke 1.6 Turbo. 43202-3DA0A is catalogued as a sealed rear wheel hub bearing assembly with an integrated ABS sensor for the Nissan Pulsar C13 platform. Public catalogues give a flange diameter of about 148 mm, a width near 105 mm, five M12 x 1.25 wheel studs and a 96-tooth ABS encoder ring. Nissan 43202-3ZL0A is listed in the same OE group, with aftermarket references including GSP 9400442, BENDIX 052241B, BTA H21101BTA, MOOG NI-WB-12909, OPTIMAL 962226, NTY KLT-NS-101, CX1053 and KAVO WBH-10006.
This page gives buyers the exact OE reference, axle position, cross references, dimensions and vehicle coverage in one place, so an importer, distributor or workshop can confirm fitment before requesting a quote. ALLTA is an aftermarket supplier; OEM numbers and vehicle names are used for identification only.
What is 43202-3DA0A?
43202-3DA0A is a rear wheel hub bearing assembly with abs fitted to the rear axle, left or right (the same hub fits both sides). It carries the wheel load, keeps the wheel plane true and, where equipped, generates the wheel-speed signal for the ABS. The unit is sealed and pre-set at the factory, so it is replaced as a complete assembly rather than rebuilt.
Product Specifications
| Item | Specification |
|---|---|
| Part type | Sealed rear wheel hub and bearing assembly with integrated ABS sensor |
| Fitting position | Rear axle; left and right share the same reference – confirm by OE |
| ABS | Integrated wheel-speed sensor with 96-tooth encoder ring (catalogue reference) |
| Flange diameter | About 148 mm (supplier catalogue) |
| Wheel studs | 5 x M12 x 1.25 |
| Assembly width | About 105 mm (supplier catalogue) |
| Cross references | 43202-3ZL0A / 9400442 / 052241B / H21101BTA / NI-WB-12909 |
| Supply | MOQ 6 pcs; neutral, ALLTA or private-label packing; Available upon request where applicable documents on request |
| OE Number | 43202-3DA0A |
| Brand | ALLTA (aftermarket replacement) |
| MOQ | 6 pcs |
| Warranty | Confirmed by product and quotation |
| Certificate | Available upon request where applicable |
| Packing | Neutral carton, ALLTA carton or customised private label |
| Service | OE matching, cross reference checking, sample order, wholesale supply |
Vehicle Fitment for 43202-3DA0A
The table below lists the applications recorded for 43202-3DA0A. Treat it as a sourcing guide: trim level, market and production date can change the part, so always confirm against the number on the original unit or the VIN.
| Vehicle brand | Model / engine | Position | Year |
|---|---|---|---|
| Nissan | Pulsar Hatchback (C13) 1.2 DIG-T / 1.5 dCi / 1.6 DIG-T | Rear axle | 2013- |
| Nissan | Sylphy / Sentra (B17Z) 1.6 / 2.0 | Rear axle | 2012- |
| Nissan | Tiida (C12Z / C13Z) | Rear axle | 2011- |
| Nissan | Bluebird (U15Z) | Rear axle | 2015-2022 |
Cross Reference and OE Interchange
When the local catalogue shows a different number, compare the following references with the flange, bolt pattern, splined bore and ABS ring before substituting: 43202-3ZL0A / 9400442 / 052241B / H21101BTA / MOOG NI-WB-12909 / OPTIMAL 962226 / KLT-NS-101 / CX1053 / WBH-10006 / SKWB-0181404 (verify by VIN and old-part number).
A cross reference is an interchangeable number, not a guarantee of identical sensors or packaging. Send the number from the old part and a photo of both faces and our team will confirm the match.
How to Confirm Fitment Before Ordering
- Read the OE number stamped or laser-marked on the original hub, not only the vehicle registration.
- Check the axle position (front or rear) and whether the left and right sides share one part number.
- Compare the flange diameter, wheel stud count and thread, centre bore and mounting bolt pattern.
- Confirm the ABS configuration: encoder ring, tone ring tooth count and sensor connector where applicable.
- Send the VIN, model year and a clear photo of both sides of the old unit with your enquiry.
Frequently Asked Questions
Q: Which vehicles does 43202-3DA0A fit?
A: It is listed for the Nissan Pulsar C13 hatchback 2013-on and grouped with the Sylphy / Sentra B17Z, Tiida C12Z / C13Z and Bluebird U15Z platforms. Market and engine change the hub, so confirm by VIN and by the number stamped on the original unit.
Q: Is 43202-3DA0A a front or rear hub?
A: Catalogues describe 43202-3DA0A as a rear axle wheel hub bearing assembly. Nissan front hubs use different references such as 40202-ED510.
Q: Does 43202-3DA0A include the ABS sensor?
A: The unit is catalogued with an integrated ABS sensor and encoder ring. Some catalogue listings also show a separate wheel-bearing-kit option, so compare the sensor and connector on the old part before ordering.
Q: Which numbers interchange with 43202-3DA0A?
A: Catalogues group 43202-3ZL0A, GSP 9400442, BENDIX 052241B, BTA H21101BTA, MOOG NI-WB-12909 and OPTIMAL 962226 with this OE. Interchange is a sourcing guide only: check the flange, stud thread and ABS encoder.
Q: What is the MOQ and warranty?
A: ALLTA quotes from 6 pcs with a Warranty confirmed by product and quotation, neutral or private-label packing and Available upon request where applicable documentation on request.
Related ALLTA Wheel Hub Bearings
Continue sourcing within the ALLTA catalogue: Wheel Hub Bearings category, 43202-5RF0A Nissan Kicks rear hub bearing, 43202-JN00A Nissan Teana rear hub bearing, 40202-ED510 Nissan Tiida front hub bearing, 42200-T0B-951 rear wheel hub bearing, BDWP-26-15X rear wheel hub bearing, request a quotation for 43202-3DA0A. You can also browse the full product catalogue for other chassis references.
References and Standards
Vehicle and technology context: Nissan official global site, 43202-3DA0A Nissan Pulsar rear hub catalogue and cross references, 43202-3DA0A OE number equivalents and dimensions, SAE international automotive standards. ALLTA production and inspection follow IATF 16949 aligned quality control with SGS documentation available on request. OEM part numbers and vehicle names on this page are used for fitment identification only; ALLTA is not affiliated with or endorsed by any vehicle manufacturer.
Need a price, lead time or sample? Send the OE number and quantity to the ALLTA team and we will confirm fitment, packing and delivery before the order is placed.
43202-3DA0A Wholesale Sourcing: Matching, Quality and Delivery
Buyers comparing 43202-3DA0A need more than a vehicle name. Nissan small-car rear hubs can look almost identical while the ABS encoder, stud thread and production revision differ. ALLTA matches the OE number first, then checks photographs of both faces of the old hub before issuing a quotation.

Cross references such as 43202-3ZL0A, 9400442, BENDIX 052241B and MOOG NI-WB-12909 are useful for sourcing, but they are not a substitute for a physical comparison. Confirm the encoder ring, the five M12 x 1.25 studs and the number stamped on the original unit before committing to a container order.
Tell the ALLTA team the VIN, the old-part number and the required quantity to confirm stock, label artwork and lead time. Useful pages: wheel hub bearings category, 43202-5RF0A related Nissan hub, 40202-ED510 Nissan front hub, and request a quote for 43202-3DA0A. Catalogue background: 43202-3DA0A Nissan Pulsar rear hub catalogue and cross references.



